254 SMO (UNS S31254, EN 1.4547) Flanges to ASTM A182 F44
Dinesh Tube India supplies and exports 254 SMO flanges (also called SMO 254 or 6Mo flanges) from Mumbai for seawater, desalination, offshore and chemical piping. The material is the super-austenitic stainless steel UNS S31254 (EN 1.4547), forged to ASTM A182 / ASME SA182 Grade F44, with dimensions to ASME B16.5 and B16.47, and EN 10204 3.1 mill test certificates.
With about 20% chromium, 18% nickel, 6.1% molybdenum and 0.2% nitrogen (PRE about 43), 254 SMO resists pitting and crevice corrosion in seawater and chloride brines far better than 316L or 904L. That matters most at flanges, where the gasket face forms a tight crevice.
254 SMO® is a trademark of Outokumpu. Dinesh Tube India is an independent supplier; flanges are supplied to ASTM A182 F44 / UNS S31254 from approved forging mills, with the producing mill shown on the certificate.
254 SMO Flange Types
Weld Neck Flange
Butt-welded to the pipe; the best choice for higher pressure and cyclic service.
Slip-On Flange
Slides over the pipe and is fillet-welded; for lower-pressure lines.
Blind Flange
Closes pipe ends, nozzles and vessel openings.
Socket Weld Flange
For small-bore lines, usually 2" NPS and below.
Threaded Flange
For small-bore, low-pressure lines; seal welding is often specified in seawater.
RTJ, Lap Joint & Spectacle
Ring-type-joint faces, lap-joint flanges with stub ends, and spectacle blinds to ASME B16.48.

254 SMO Equivalent Grades
254 SMO Flange Chemical Composition (ASTM A182 F44, %)
254 SMO Flange Mechanical Properties (ASTM A182 F44, Minimum)
Check the current ASTM A182 edition and the mill certificate for governing values.
F44 (254 SMO) vs 904L vs F51 (2205) vs F53 (2507) Flanges
F44 and F53 have similar seawater resistance. F44 is chosen where an austenitic, non-magnetic material, easier welding or better low-temperature toughness is wanted; F53 where higher strength allows lighter flanges.
Why 6Mo Flanges in Seawater?
Need 254 SMO flanges? Send the flange type, NPS, class, facing, schedule (for weld neck), quantity and service to kamlesh@dineshtube-india.com or call +91 83559 10913. You can also send an enquiry.
Marking, Gaskets and Bolting
254 SMO Piping Package
254 SMO Fittings
Butt-weld elbows, tees, reducers and caps to ASTM A403 WP-S31254.
254 SMO Pipes
Seamless and welded S31254 pipe to ASTM A312.
254 SMO Plate
ASTM A240 S31254 plate for plate flanges, blinds and vessel parts.
254 SMO Flange Applications
254 SMO Flanges: FAQs
What is a 254 SMO flange?
A 254 SMO flange (also called SMO 254 or 6Mo flange) is a flange forged from super-austenitic stainless steel UNS S31254 (EN 1.4547) to ASTM A182 Grade F44. It is used where seawater or chloride brines would pit 316L or 904L flanges.
Which standard covers 254 SMO flanges?
The material is ASTM A182 / ASME SA182 Grade F44. Dimensions follow ASME B16.5 up to 24", ASME B16.47 for larger sizes, B16.48 for spectacle blinds, and EN 1092-1 on request.
What is F44 material?
F44 is the ASTM A182 forging grade for UNS S31254 (254 SMO): about 20% chromium, 18% nickel, 6.1% molybdenum, 0.2% nitrogen and 0.7% copper, with minimum tensile 650 MPa and yield 300 MPa.
Is 254 SMO a duplex steel?
No. 254 SMO is a fully austenitic (super-austenitic) stainless steel. Duplex flange grades are F51 (2205) and F53 (2507). F44 and F53 have similar seawater resistance, but F44 is non-magnetic and tougher at low temperatures.
What is the PRE of 254 SMO?
The pitting resistance equivalent (PRE = %Cr + 3.3 × %Mo + 16 × %N) of 254 SMO is about 43, compared with about 25 for 316L and 35 for 904L.
Which types and classes of 254 SMO flanges are available?
Weld neck, slip-on, blind, socket weld, threaded, lap-joint and ring-type-joint flanges, plus spectacle blinds, from ½" to 24" NPS in Class 150 to 1500 (2500 on request), with raised face, flat face or RTJ facing.
What is the price of 254 SMO flanges?
The price depends on flange type, size, class, facing, quantity and certification, and on nickel and molybdenum prices at the time of order. Send your requirement to kamlesh@dineshtube-india.com or call +91 83559 10913 for a current quote.
Export Destinations for 254 SMO Flanges
We supply 254 SMO (F44) flanges across India to desalination, power, offshore and chemical projects, and export to the Middle East (UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain), Asia (Japan, South Korea, Singapore, Malaysia, Indonesia, Vietnam), Africa (Egypt, Nigeria, South Africa) and Europe on request.