Seamless and Welded Incoloy 800, 800H and 800HT Pipes
Incoloy 800, 800H and 800HT pipes are nickel-iron-chromium alloy pipes (UNS N08800, N08810 and N08811) for high-temperature service: seamless to ASTM B407 / ASME SB407 or welded to ASTM B514 / ASME SB514. 800H and 800HT are solution annealed with a coarse grain for creep strength; alloy 800 is the annealed grade for general high-temperature corrosion service.
Dinesh Tube India supplies Incoloy 800, 800H and 800HT pipes from Mumbai to petrochemical, fertilizer and power plant buyers in India and abroad, with EN 10204 3.1 mill test certificates. Each grade has its own chemistry, heat treatment and strength, so we quote the grade and specification you name.
What Are Incoloy 800, 800H and 800HT Pipes?
Alloy 800 is an austenitic nickel-iron-chromium alloy with 30–35% nickel, 19–23% chromium and small additions of aluminium and titanium. It resists oxidation, carburisation and sulphidation at high temperature. The H and HT versions control carbon, aluminium and titanium and are solution annealed to a coarse grain size, which gives the creep and rupture strength needed above about 600 °C. The alloy is sometimes called “Inconel 800”, but its trade name is Incoloy 800.



Incoloy 800 vs 800H vs 800HT: Which Grade Do You Need?
The grades are not interchangeable. 800H and 800HT have lower room-temperature strength than 800 because of the solution anneal, but much higher creep strength. Dual-certified 800H/800HT material can be requested where your specification allows it.
Seamless or Welded: Which Specification Applies?
Seamless pipe is the usual choice for high-temperature pressure service. If your drawing names B514 welded pipe, tell us the grade and size and we quote to it.
Pipe or Tube: NPS and Schedule vs OD and Wall
Delivery Condition and Inspection
Incoloy 800 / 800H / 800HT Chemical Composition (%)
Density about 7.94 g/cm³; melting range about 1357 – 1385 °C.
Incoloy 800 / 800H / 800HT Equivalent Grades