Hastelloy B2 Flanges

Hastelloy Alloy B2 Flanges, Hastelloy Alloy B2 Flanges, Hastelloy B2 Blind Flanges, Hastelloy B2 Flanges, ASTM B564 Hastelloy B2 Socket weld Flanges Exporter, Hastelloy B2 Slip on Flanges, Hastelloy B2 Lap Joint Flanges, Hastelloy B2 Weld Neck Flanges Supplier in Mumbai, India.

Dinesh Tube India is a distinguished supplier, trader, exporter and distributor of Hastelloy B2 Flanges. Meanwhile, we also supply other range of Hastelloy flanges in different shapes, sizes, designations, standards, and custom dimensions. We are equipped with a quality control team to maintain the quality of products. We are committed to providing only high-end products customers also we take feedback to improve the quality of products.

Hastelloy B2 RTJ Flanges, Hastelloy B2 Long Weld Neck Flanges in India, Hastelloy B2 Pipe Flanges, Hastelloy Alloy UNS N10665 Flanges, ANSI B16.5 Hastelloy Alloy B2 Spectacle Blind Flanges Supplier, ASME SB564 Hastelloy B2 Threaded Flanges Stockists.

Alloy B2 is also termed as UNS N10665. It is a solid solution strengthened alloy with nickel and molybdenum content. Typically, it is considered for extreme reducing environments. It has the low carbon amount with some amount of silicon and iron. This makes flanges less susceptible to decreased corrosion resistance in the weld zone. The alloying elements are controlled to solve issues such as fabricability.

The composition of molybdenum content in alloy gives as excellent resistance to hydrochloric acid over a wide range of concentrations and elevated temperatures. It shows good resistance to hydrochloride, sulfuric acids, and phosphoric acids. These flanges have excellent resistance to pitting and stress corrosion cracking. The welding process can be performed by all standard techniques such as TIG, MIG, and SAW. The full solution annealing process is performed before welding. The cold formed materials are shot pinned before the annealing process.

These are hot worked in a temperature range between 1700 degree F to 2250 degree F. the reheating of flanges are necessary. The solution annealing process of flanges is performed at 1950 degree for 10 minutes. Subjected raw materials are charged in the hot furnace. The temperature is controlled for a limited period of time.

We provide various reports relevant to products as a quality proof of products and manual for best application in adverse environments. Those reports are Commercial invoice, specification guide, fumigation certificates, NABL test report, and guarantee letter. Other reports are raw material test report, mill test report, quality assurance plan, and heat treatment charts.

We use standard packing materials to deliver Hastelloy B2 Flanges. In order to protect flanges from damages, we use wooden boxes, crates, cartons, and pallets with a covering of thin plastic sheet.