A335 P5 Pipe for Refinery Heaters and Sulfur-Bearing Service
ASTM A335 / ASME SA335 Grade P5 (UNS K41545) is seamless 5Cr-½Mo chrome-moly steel pipe with 4.00 – 6.00% chromium and 0.45 – 0.65% molybdenum. It requires 415 MPa minimum tensile and 205 MPa minimum yield strength and is supplied annealed, or normalised and tempered at 675 °C minimum.
Dinesh Tube India supplies A335 P5 seamless pipe from Mumbai with EN 10204 3.1 mill test certificates and third-party inspection on request.
What Is P5 and How Does It Compare With P9 and P11?
P5 has about four times the chromium of P11. The extra chromium gives much better resistance to high-temperature sulfidation and oxidation, so P5 is used mainly in oil refining – fired heater tubes, furnace and transfer lines, and piping that carries sulfur-bearing hydrocarbons at elevated temperature. P9 is used where sulfur content or temperature is higher still.
| Grade | Type | Cr | Mo | Tensile / yield min |
|---|---|---|---|---|
| P11 | 1¼Cr-½Mo | 1.00 – 1.50% | 0.44 – 0.65% | 415 / 205 MPa |
| P5 | 5Cr-½Mo | 4.00 – 6.00% | 0.45 – 0.65% | 415 / 205 MPa |
| P9 | 9Cr-1Mo | 8.00 – 10.00% | 0.90 – 1.10% | 415 / 205 MPa |
The grades have different allowable stresses in the design codes and are not interchangeable without design approval.


P5, P5b or P5c: What Is the Difference?
P5b and P5c are supplied on request; state the exact grade on the order.
Is A335 P5 Pipe Seamless Only?
A335 P5 Seamless Pipes
How Should You Order P5 Pipe Sizes?
Which Heat Treatment Applies to P5 Pipe?
The heat treatment applied is stated on the mill test certificate.
A335 P5 Chemical Composition (%)
Limits for UNS K41545 (P5) and K51545 (P5b) per ASTM A335.
A335 P5 Mechanical Properties
Per ASTM A335. Actual values are reported on the mill test certificate.
Which Tests and Certification Apply?
Which Fittings, Flanges, Tube and Plate Match P5 Pipe?
What Are the P5 Equivalent Grades?
X11CrMo5 is close to A335 P5 but not identical; name the standard you need on the order.
A335 P5 Pipe Specification
Standard
Process
Size
Schedule
Length
Ends
Condition
Certification
How to Order A335 P5 Pipe: RFQ Example
A complete enquiry lets us quote in one round. Replace the values with your own.
Send your P5 pipe RFQ in this format to kamlesh@dineshtube-india.com, call or WhatsApp +91 83559 10913, or send an enquiry.
Where Is A335 P5 Pipe Used?
Other A335 grades: P1, P2, P9, P11, P22, P91 and P92. See all alloy steel pipes.
A335 P5 Pipe: FAQs
What is A335 P5 pipe?
A335 P5 (UNS K41545) is seamless 5Cr-½Mo chrome-moly alloy steel pipe for high-temperature service. It contains 4.00–6.00% chromium and 0.45–0.65% molybdenum and is used mainly in refinery heater and transfer lines handling sulfur-bearing hydrocarbons.
What is the chemical composition of A335 P5?
A335 P5 contains carbon 0.15% max, manganese 0.30–0.60%, phosphorus and sulphur 0.025% max each, silicon 0.50% max, chromium 4.00–6.00% and molybdenum 0.45–0.65%.
What are the mechanical properties of A335 P5?
A335 P5 requires 415 MPa (60 ksi) minimum tensile strength, 205 MPa (30 ksi) minimum yield strength, and 30% longitudinal or 20% transverse minimum elongation.
What is the difference between P5, P5b and P5c?
All three are 5Cr-½Mo. P5b has higher silicon (1.00–2.00%) for better oxidation resistance. P5c has a titanium addition and must receive a final heat treatment at 715–745 °C. Standard P5 is the most common; state the exact grade on the order.
What is the EN equivalent of A335 P5?
The nearest European grade is X11CrMo5 (1.7362) in EN 10216-2. It is close to P5 but not identical, so name the standard you need on the order.
Are you a P5 pipe manufacturer?
Dinesh Tube India is a Mumbai-based supplier, stockist and exporter of A335 P5 pipe. We source seamless pipe from qualified mills and supply it with the mill test certificate and traceability to the heat number.
What should a P5 pipe enquiry include?
State ASTM A335 or ASME SA335 Grade P5 (or P5b / P5c), NPS and schedule or wall, length, quantity, end finish, tests (hydrostatic or NDE, PMI) and documents (EN 10204 3.1, 3.2 or third-party inspection), plus the delivery destination.
Export Destinations for P5 Pipe
We supply A335 P5 pipe from Mumbai within India and export to power, refinery and EPC projects in the Middle East, Africa, Asia, Europe and the Americas. Tell us your destination port when you enquire.