A387 Grade 5 Plate for Refinery Heaters and Pressure Vessels
ASTM A387 / ASME SA387 Grade 5 (UNS S50200) is 5Cr-½Mo chrome-moly alloy steel plate for welded pressure vessels and refinery equipment in elevated-temperature service. It is supplied normalised and tempered (705 °C minimum tempering) in Class 1 (415 – 585 MPa tensile, 205 MPa yield) or Class 2 (515 – 690 MPa tensile, 310 MPa yield).
Dinesh Tube India supplies A387 Grade 5 plates from Mumbai, cut to size on request, with EN 10204 3.1 mill test certificates and third-party inspection on request.
Table of Contents
- What Is A387 Grade 5?
- Class 1 or Class 2?
- Delivery Condition and Heat Treatment
- Thickness Effects
- Thickness, Width and Cutting
- Chemical Composition
- Mechanical Properties
- Tests and Certification
- Matching Pipe, Flanges and Fittings
- Equivalent Grades
- Specification
- How to Order: RFQ Example
- Where It Is Used
- FAQs
What Is A387 Grade 5 and How Does It Compare With Grades 9 and 22?
Grade 5 has nominal 5% chromium and 0.5% molybdenum. The higher chromium content gives better resistance to high-temperature sulfidation and oxidation than 1¼Cr and 2¼Cr grades, so it is used mainly in oil refining – heater and furnace components, coker and crude unit vessels – and for welded pipe made from plate.
| A387 grade | Nominal Cr / Mo | Typical use |
|---|---|---|
| Grade 5 | 5.00 / 0.50% | Refinery vessels and sulfidation service |
| Grade 9 | 9.00 / 1.00% | More severe sulfidation and higher temperatures |
| Grade 22 | 2.25 / 1.00% | Hydroprocessing reactors and high-temperature vessels |


Class 1 or Class 2: Which Should You Order?
The class must be stated on the order; plate marked Grade 5 without a class should not be assumed to be Class 2.
Which Delivery Condition and Heat Treatment Apply?
How Does Thickness Affect Grade 5 Plate?
Which Thickness, Width and Cutting Options Are Available?
A387 Grade 5 Chemical Composition (%)
Limits for UNS S50200 per ASTM A387; check P and S limits against the edition named in your order. Chemistry is the same for Class 1 and Class 2.
A387 Grade 5 Mechanical Properties by Class
Transverse tests per ASTM A387 and A20; elongation is adjusted for plate thickness under A20.
Which Tests and Certification Apply?
Which Pipe, Flanges and Fittings Match A387 Grade 5 Plate?
What Are the A387 Grade 5 Equivalent Grades?
European grades are not direct substitutes without approval; name the standard and delivery condition (for example +NT) on the order.
A387 Grade 5 Plate Specification
Standard
Class
Thickness
Width / length
Condition
General requirements
Cutting
Certification
How to Order A387 Grade 5 Plates: RFQ Example
A complete enquiry lets us quote in one round. Replace the values with your own.
Send your A387 Grade 5 plate RFQ in this format to kamlesh@dineshtube-india.com, call or WhatsApp +91 83559 10913, or send an enquiry.
Where Is A387 Grade 5 Plate Used?
Other A387 plate grades: Grade 9, Grade 11, Grade 22 and Grade 91. See all alloy steel plates.
A387 Grade 5 Plates: FAQs
What is ASTM A387 Grade 5 plate?
ASTM A387 Grade 5 (UNS S50200) is 5Cr-½Mo chrome-moly alloy steel plate for welded pressure vessels and refinery equipment in elevated-temperature service. It is supplied in Class 1 or Class 2, with the same chemistry and different strength levels.
What is the difference between A387 Grade 5 Class 1 and Class 2?
Class 1 requires 415–585 MPa tensile and 205 MPa minimum yield strength. Class 2 requires 515–690 MPa tensile and 310 MPa minimum yield. The class must be stated on the order.
What is the chemical composition of A387 Grade 5?
On heat analysis A387 Grade 5 contains carbon 0.15% max, manganese 0.30–0.60%, silicon 0.50% max, chromium 4.00–6.00% and molybdenum 0.45–0.65%, with low phosphorus and sulphur limits. Product analysis allows slightly wider ranges, and carbon may be 0.17% max on product analysis for plates over 125 mm thick.
What heat treatment does A387 Grade 5 need?
Plates are normalised and tempered, or quenched and tempered when agreed, with a minimum tempering temperature of 705 °C (1300 °F). Post-weld heat treatment follows the WPS and design code.
What is the EN equivalent of A387 Grade 5?
The European equivalent is X12CrMo5 (1.7362) to EN 10028-2. Plate mills can dual-certify SA387 Grade 5 and X12CrMo5; name the standard and delivery condition on the order.
Are you an A387 Grade 5 plate manufacturer?
Dinesh Tube India is a Mumbai-based supplier, stockist and exporter of A387 Grade 5 plates. We source plate from qualified mills, cut it to size and supply it with the mill test certificate and inspection you specify.
What should an A387 Grade 5 plate enquiry include?
State ASTM A387 or ASME SA387 Grade 5 with Class 1 or Class 2, thickness, width, length or cut sizes, quantity, delivery condition, supplementary tests (simulated PWHT, UT, impact) and documents (EN 10204 3.1, 3.2 or third-party inspection).
Export Destinations for A387 Grade 5 Plates
We supply A387 Grade 5 plates from Mumbai within India and export to fabricators, refinery and EPC projects in the Middle East, Africa, Asia, Europe and the Americas. Tell us your destination port when you enquire.