A53 Grade B Seamless & ERW Pipe, Black or Galvanized
Dinesh Tube India supplies ASTM A53 Grade B carbon steel pipes from Mumbai to contractors, plant maintenance teams, fire-fighting and utility projects in India and abroad. We supply A53 Gr B seamless (Type S) and ERW (Type E) pipe, in black or hot-dip galvanized finish, from 1/2" to 24" NB, with an EN 10204 3.1 mill test certificate.
A53 is the general-purpose carbon steel pipe for water, air, gas, low-pressure steam and structural use. For high-temperature process piping, see ASTM A106 Gr B. Send us your type, size, schedule, finish, length and quantity for a quote.
What Is ASTM A53 Grade B?
ASTM A53/A53M is the standard specification for seamless and welded, black and hot-dip galvanized steel pipe. ASME adopts it as SA53. It covers pipe from NPS 1/8 to NPS 26 for mechanical and pressure applications, and for ordinary use in steam, water, gas and air lines. Grade B is the stronger and more common of its two grades, with a minimum tensile strength of 415 MPa and yield of 240 MPa.
A53 pipe is suitable for welding, bending, coiling and flanging. Because it can be made by ERW as well as seamless, it is often more economical than A106 for general service. Seamless A53 Gr B is frequently triple certified with A106 Gr B and API 5L Gr B, so one pipe can meet all three specifications.



ASTM A53 Types: S, E and F
A53 Grade B Chemical Composition
Values in weight %. The combined Cu, Ni, Cr, Mo and V must not exceed 1.00%.
ASTM A53 Mechanical Properties
Minimum elongation depends on wall thickness and specimen size per ASTM A53.
Need A53 Gr B pipe, black or galvanized? Send your type, size, schedule, finish, length and quantity to kamlesh@dineshtube-india.com or call +91 83559 10913. You can also send an enquiry.
Types of A53 Gr B Pipe
A53 Gr B Seamless (Type S)
A53 Gr B ERW (Type E)
A53 Galvanized Pipe
ASTM A53 vs A106
For a full comparison of carbon steel pipe grades, see our carbon steel seamless pipes page.
ASTM A53 Equivalent Standards
Nearest equivalents only. Strength, dimensions and testing differ, so check against your project specification before substituting.
ASTM A53 Gr B Pipe Applications
Matching A234 WPB fittings and A105 flanges are available. See also API 5L Gr B line pipe.
ASTM A53 Grade B Pipes: FAQs
What is ASTM A53 Grade B pipe?
ASTM A53 Grade B is a carbon steel pipe for general mechanical and pressure use, covering water, steam, air and gas lines and structural applications. It is made seamless (Type S) or electric-resistance welded (Type E), in black or hot-dip galvanized finish, with a minimum tensile strength of 415 MPa and yield of 240 MPa. ASME adopts it as SA53.
What is the difference between ASTM A53 and A106?
ASTM A106 is seamless only and is written for high-temperature service, with a minimum silicon content for better heat resistance. ASTM A53 can be seamless or welded and is for general, lower-temperature service. Grade B of both has the same minimum strength, and seamless pipe is often dual certified to A53 Gr B and A106 Gr B, but for high-temperature process lines A106 is normally specified.
What do Type S, Type E and Type F mean in ASTM A53?
Type S is seamless pipe. Type E is electric-resistance welded (ERW) pipe, available in Grades A and B. Type F is furnace butt-welded pipe, made only in Grade A, and is rarely used today. Grade B pipe is therefore either Type S or Type E.
What is the equivalent Indian standard for ASTM A53?
The nearest Indian standard is IS 1239 Part 1 for mild steel tubes up to 150 mm nominal bore, and IS 3589 for larger welded pipe. They are similar in use but differ in strength levels, dimensions and testing, so they are not direct substitutes for A53 Grade B where a project specifies ASTM.
Is ASTM A53 pipe available galvanized?
Yes. A53 pipe can be ordered black (plain or varnished) or hot-dip galvanized, with zinc coating inside and outside. Galvanized A53 is common for water supply, fire-fighting and outdoor lines. Galvanized pipe should not be used where it will be welded without removing the coating, or in high-temperature service.
What sizes of ASTM A53 pipe are available?
ASTM A53 covers pipe from NPS 1/8 to NPS 26. We supply A53 Grade B from 1/2" to 24" NB in schedules from SCH 10 to XXS, in single or double random lengths, with plain, bevelled or threaded ends.
Export Destinations for A53 Pipes
We export ASTM A53 Grade B pipes to the Middle East (UAE, Saudi Arabia, Qatar, Kuwait, Oman, Bahrain, Iraq, Jordan), Africa (Nigeria, Egypt, South Africa, Kenya, Ghana, Algeria, Morocco, Tunisia), Asia (Japan, South Korea, Singapore, Malaysia, Indonesia, Thailand, Vietnam, Philippines, Bangladesh, Sri Lanka), Europe (Italy, Spain, Portugal, France, Netherlands, Belgium, Poland, Romania, Turkey, United Kingdom), and the Americas (United States, Canada, Mexico, Brazil, Chile, Peru, Colombia, Argentina).