Nickel-Iron-Chromium Alloy 800, 800H and 800HT Tubes for High-Temperature Service
Alloy 800, 800H and 800HT tubes are nickel-iron-chromium alloy tubes (UNS N08800, N08810, N08811) ordered by outside diameter and wall thickness: seamless condenser and heat exchanger tube to ASTM B163 / ASME SB163, seamless tube to B407, and welded tube to B515. The three grades differ in carbon, aluminium plus titanium, grain size and strength, so order the grade your design names.
Dinesh Tube India supplies Incoloy® alloy 800, 800H and 800HT tubes from Mumbai, seamless as standard and welded B515 tube on request, with EN 10204 3.1 mill test certificates. 800H and 800HT tubes are supplied with the grain size their specification requires.
Table of Contents
- What Are Alloy 800, 800H and 800HT Tubes?
- 800, 800H or 800HT?
- Which Tube Specification?
- Tube Sizes: OD and Wall
- Delivery Condition and Heat Treatment
- Tests and Documents
- Chemical Composition
- Mechanical Properties
- Equivalent Grades
- Tube Specification
- How to Order: RFQ Example
- Where They Are Used
- FAQs
What Are Alloy 800, 800H and 800HT Tubes?
Alloy 800 is an austenitic nickel-iron-chromium alloy with about 32% nickel and 21% chromium. It resists oxidation, carburisation and sulphidation at high temperature and stays stable in long service. Alloy 800 is used for corrosion and oxidation service, generally below about 600 °C. Alloys 800H and 800HT have controlled carbon and a coarse grain from a high-temperature solution anneal, which gives them the creep and rupture strength needed above about 600 °C, for example in reformer, cracker and heater tubes.


Alloy 800, 800H or 800HT: Which Grade Do You Need?
The grades are not interchangeable. 800H and 800HT have lower room-temperature strength than 800 because of the solution anneal, but much higher creep strength. 800HT always meets 800H; dual-certified 800H/800HT tube can be requested where your specification allows it.
Which Tube Specification Applies?
If your drawing names B515 welded tube, tell us the grade and size and we quote to it; if it names B163, the tube is seamless.
Tube Sizes: OD and Wall Thickness
Delivery Condition and Heat Treatment
Which Tests and Documents Apply?
Chemical Composition of Alloy 800, 800H and 800HT (%)
Limits as commonly specified in ASTM B163 / B407 / B515; check the edition named in your order.
Mechanical and Physical Properties by Grade
Physical properties: density about 7.94 g/cm³, melting range about 1357 – 1385 °C.
Alloy 800, 800H and 800HT Equivalent Grades
Equivalents are the nearest national grades, not identical specifications; confirm the required standard before ordering. Incoloy® is a registered trademark of Special Metals Corporation. Dinesh Tube India is an independent supplier and is not affiliated with the trademark owner.
Alloy 800 / 800H / 800HT Tube Specification
Seamless
Welded
Grades
Outside Diameter
Wall Thickness
Form
Delivery Condition
Certification
Types of Alloy 800 Tubes
Seamless Heat Exchanger Tubes
Seamless Tubes (B407)
Welded Tubes (B515)
How to Order Alloy 800H Tubes: RFQ Example
A complete enquiry lets us quote in one round. Replace the values with your own.
Send your alloy 800 / 800H / 800HT tube RFQ in this format to kamlesh@dineshtube-india.com, call or WhatsApp +91 83559 10913, or send an enquiry.
Where Are Alloy 800, 800H and 800HT Tubes Used?
Related pages: alloy 800 / 800H / 800HT pipes, Incoloy 825 tubes, Inconel 600 tubes, Inconel 625 tubes and our heat exchanger tubes.
Alloy 800 / 800H / 800HT Tubes: FAQs
What is the difference between alloy 800, 800H and 800HT tubes?
All three are nickel-iron-chromium alloys with about 32% nickel and 21% chromium. Alloy 800 (UNS N08800) has up to 0.10% carbon and is annealed for oxidation and corrosion service. Alloy 800H (N08810) has 0.05 to 0.10% carbon and a high-temperature solution anneal giving ASTM grain size 5 or coarser, for creep strength. Alloy 800HT (N08811) further restricts carbon to 0.06 to 0.10% and aluminium plus titanium to 0.85 to 1.20%, for the highest creep-rupture strength.
Can 800H tubes be used where 800HT is specified?
No. 800HT always meets 800H, but 800H does not necessarily meet the 800HT limits on carbon and aluminium plus titanium. Dual-certified 800H/800HT tube meets both and can be requested. Alloy 800 should not replace 800H or 800HT in creep service, because it has no grain-size or minimum-carbon requirement.
Which specification covers alloy 800H heat exchanger tubes?
Seamless condenser and heat exchanger tubes are ordered to ASTM B163 / ASME SB163. ASTM B407 / ASME SB407 covers seamless pipe and tube more generally, with general requirements in B829. Welded tubes are ordered to ASTM B515 / ASME SB515, with general requirements in B751.
What is an ASTM B515 welded alloy 800 tube?
ASTM B515 covers welded tubes in UNS N08800, N08810 and N08811, made from strip and welded without filler metal, then annealed and tested. It is used where your design code accepts welded tube; for heat exchanger tubes many specifications still call for seamless B163. Welded B515 tube is supplied on request.
Is "Inconel 800" the same as Incoloy 800?
"Inconel 800" is a common misnomer. The trade name of alloy 800 is Incoloy 800, identified as UNS N08800 (W.Nr. 1.4876). Inconel is a different family of nickel-chromium alloys, such as Inconel 600 and 625.
Do you supply 800H pipe as well as tube?
Yes. Pipe is ordered by nominal pipe size and schedule to ASTM B407 (seamless) or B514 (welded). See our Incoloy 800 / 800H / 800HT pipes page.
What should an alloy 800H tube enquiry include?
Give the grade and UNS number, specification (for example ASME SB163 UNS N08810), seamless or welded, outside diameter, minimum or average wall, length, quantity, any U-bending, heat treatment and grain-size requirement, tests (hydrostatic or eddy current, PMI), documents (EN 10204 3.1, 3.2 or third-party inspection) and the delivery date.
Export Destinations for Alloy 800 Tubes
We supply alloy 800, 800H and 800HT tubes within India and export to heat exchanger fabricators, EPC contractors and plants in the Middle East, Africa, Asia, Europe and the Americas. Tell us your destination port when you enquire.